|
|
|
Made with inorganic materials, CCITEK® binder is very environmentally friendly. Using CCITEK® binder, sand core can be made with lower temperature(150°C ~ 200°C). This biner coated wet sand generates no smoke and is odorless when baking sand core or during pouring. It is especially great for non-ferrous metal aluminum castings. It helps eliminating pin hole and shrinkage problem. It can be used in some iron casting as well.
|
Technical Parameters |
1.Hot tensile strength: >0.6Mpa;
2.Cold tensile strength: >1.2Mpa;
3.Gas Generated: <8ml/g;
4.Flowability: 2.5~4.5g. |
|
Directions |
Different from tranditional resin coated sand. Equipment and mold alterations required. |
|
Applications |
1. Aluminum engine cylinder head,intake manifold, and airway.
2. Shell mold casting for iron. |
|
Remarks |
1. Storage: prevent heat (5℃~25℃);
2. Upon opening, use it immediately in CCITEK® certified core making equipment;
3. Shelf life: during warm weather seasons, use it within 8 hours upon arrival. During cold weather seasons, use it within 24 hours upon arrival;
4. Used sand can be reclaimed. Contact us for detail. |
|
Ingredients |
Aggregates: silica sand; Binder: CCITEK® binder;
Enhancer: inorganic compound curing agent; Additives: compound modifiers |
|
Packages |
25kg、50kg |
|
|
.jpg)
 (1).jpg)
(1).jpg)
